Four Methods for Measuring the Length of Direct Buried Insulation Pipe

直埋保温管厂家对于生产的直埋保温管把握正确的尺寸是非常重要的，其宽度是比较好丈量的，但是因其长度太长，所采取丈量长度的办法也会有所考究，今日山东直埋保温管厂家就来共享几种丈量直埋保温管长度的办法，感兴趣的朋友能够了解一下。

It is very important for manufacturers of directly buried insulating pipes to grasp the correct size. Its width is better measured, but because its length is too long, the method of measuring the length will also be studied. Today, Shandong directly buried insulating pipe manufacturers come to share several methods of measuring the length of directly buried insulating pipes. Interested friends can learn about it.

1.选用改进型的编码器丈量

1. Selection of improved encoder for measurement

其实这种丈量长度的办法是归于直接型的，也就是经过丈量钢管两个端面和各自基准点之间的间隔，从而来直接的测出直埋保温管的长度。

In fact, this method of measuring the length is attributed to the direct type, that is, through measuring the distance between the two ends of the steel pipe and their respective reference points, so as to directly measure the length of the directly buried insulation pipe.

2.经过光栅尺丈量

2. Measuring by grating ruler

在直埋保温管两端的外侧分别设置上两个固定长度的光栅尺，之后是使用无杆气缸来带动光栅尺近钢管两端的，从而来使用光的干涉现象完成对直埋保温管长度的丈量。

Two fixed length grating rulers are set on the outer side of the two ends of the directly buried insulating pipe, and then the rodless cylinder is used to drive the grating ruler near the two ends of the steel pipe, so that the length of the directly buried insulating pipe can be measured by the interference of light.

3.选用摄像机丈量

3. Selection of cameras for measurement

直埋保温管的长度，也就是使用图像处理来进行丈量。

The length of directly buried insulating pipe is measured by image processing.

4.选用编码器丈量

4. Selecting Encoder to Measure

选用这种办法需要在油缸的地方安装上编码器，直埋保温管使用油缸来推进钢管在辊道上进行运动，之后需要在另一侧安装上等间隔的一系列光电开关，那么当钢管被油缸推进管端碰到光电开关的时候，从记载的编码器当中就能够进行读数，从而换算出油缸的行程，这样就能够计算出钢管的长度了。

This method needs to install a coder in the place of the oil cylinder. The directly buried insulating pipe uses the oil cylinder to propel the steel pipe to move on the roller track. Then a series of photoelectric switches with equal intervals need to be installed on the other side. When the steel pipe is touched by the photoelectric switch at the end of the oil cylinder propelling pipe, it will be from the coder recorded. The length of the steel pipe can be calculated by reading and calculating the stroke of the cylinder.

综上所述有山东海珀管业科技发展有限公司提供，想了解更多济南保温管知识，欢迎关注我们的网站：http://www.sdhpgy.com谢谢支持！

In summary, all the above-mentioned Shandong Hipper Pipe Technology Development Co., Ltd. provides, want to know more about Jinan insulation pipe knowledge, welcome to pay attention to our website: http://www.sdhpgy.com Thank you for your support!